We are now taking orders for the 123 Ignition Tune
123ignition did it again ! If you want to tune your engine, or you have an engine for which there is no standard distributor available.....the new 123\TUNE is the answer ! By connecting it to a computer, the end-user can easily adapt the 123\TUNE to fulfill even the most demanding requirements. The unit offers two sets of curves that can be selected by placing 12 Volt on a wire from the 123\TUNE.
The latest version of the 123\TUNE software is 1.3.0
download it now (31 Mb installer)
Here are all the features offered :
- rotation CW and CCW ( autodetect )
- for 6 Volt and/or 12 Volt cars ( autodetect )
- for positive and negative earthed cars
( 123\TUNE-8 is for neg.earth ONLY )
- two centrifugal advance curves
( 500 to 8000 rpm )
- two vacuum-advance and boost-retard curves
( 0 to 200 kPa or -30 inHg to +15 psi )
- two MAP-start fields
- two rev.limiters ( advanced random spark stealing )
- real-time tuning under keyboard-control ( ideal for working on a rolling road )
- rpm-stopwatch ( ideal for tuning using the road itself as a rolling road )
- luxurious import-from-file and export-to-file ( curves can easily be exchanged over the internet )
- electronic "dashboard" with :
temperature gauge ( selectable in degrees Celsius or Fahrenheit )
manifold pressure ( selectable in Bar or inches Hg / Psi )
rev. counter ( 0 to 8000 rpm crankshaft )
spark-energy gauge ( primary coil current )
total-advance gauge ( in degrees crankshaft )
- available in 4- , 6- and 8- cylinder models with various sizes and shapes.
Below you will find linedrawings with the dimensions of the different models available. The four-cylinder model, can be supplied with a top-entry or with a side-entry cap. ( not interchangable! )
The six-cylinder model however can only be
supplied with a top-entry cap.